This standard is issued under the fixed designation D ; the number immediately This test method was adopted as a joint ASTM–IP standard in operator prepares and inserts the beakers (with test oil, covers, and stirrers) into the bath as per ASTM D method. The test rod assembly (includes the steel. Model is a 6 test positions agitated liquid bath conforming to ASTM D, D, D, NACE TM and other similar tests. A timer alerts the.
Rusting test apparatus assembly with specimens for D Fig. Vertical test specimen for D includes specimen, washer, capeach.
Rust-Preventing Characteristics of Mineral Oil – ASTM D665, D3603, D7548 | NACE TM-01-72 | IP 135
Home Products Contacts Search. Specifications subject to change without notice. A timer alerts the operator to method critical steps requering attention. A secondary high temperature limit switch prevents over heating in the event of primary controller failure.
ASTM D Rusting Characteristics of Petroleum Products
In addition, a float switch interrupts power to the heaters in the event of low bath liquid level. The stainless steel bath has drain for easy replacement of the bath medium.
The x665 beakers rest on a perforated support rack at the test specified level. The individual stirrers are belt driven. A digital tachometer is provided displaying the rotational speed of the stirrers. Mounted on the control panel is a power switch for turning the stirrers on and off without disturbing the power to the bath.
Individual stirrers have the ability to be lifted out of the test beaker by simply loosening the knurled holding nut and lifting from the beaker. When lifted, the stirrer shaft protrudes through the top of the apparatus, allowing full and easy access to the test beaker. A clear plastic safety guard is available as an option on the front of the apparatus protecting the operator from the 6d65 stirrer shafts.
Model is identical to Model but with only 4 test positions. Model A is an aluminum dry bath with 4 positions. Each position is individually temperature controlled and independent of other positions.
This feature, unlike conventional aluminum block baths allows precise temperature adjustment. The advantage of the these aluminum baths over a liquid bath is the safety with the elimination of fumes and fire hazards if using oil as the bath medium.
Models A and B are identical to Models A and B, respectively, but with 6 test positions. It consists of ast motor rotating the chuck at to rpm.
The design chuck is as specified by the test method. A protective cover is provided over the motor. Manual Liquid Bath for Rust Testing, 4 positions. Manual Liquid Bath for Rust Testing, 6 positions. Polishing device with chuck Volts. Holding chuck for polishing test specimen. Steel test specimen for D, each. Beaker cover for D and D, each. Horizontal disc test specimen for D, each. Clear plastic stirrers’ shield for 4 position baths.
D665 plastic stirrers’ shield for 6 position baths. FTM Paddle and Shaft. Water beaker for D Part B, each. Silicone carbide paper grit 50 sheets.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.